GUIDE · RETAIL SECTOR

Customer Wi-Fi for hotels and shops: captive portal, logs and obligations

This guide explains how to offer Wi-Fi to customers and guests without exposing the internal network and without collecting more data than necessary. By the end you will know how to set up the access page, what to write in the privacy notice and which checks to make every quarter.

Updated october 2026
7 min read
Altovar Technical Editorial Team

1. Why customer Wi-Fi needs attention

Offering a free connection or one included in the service is now a common expectation in hotels, bars, restaurants and shops. Technically, it is an open network used by people you do not know, connected to your infrastructure. In terms of privacy, it is also a point where you collect personal data, sometimes without the customer realising. The two aspects must be managed together. A poorly separated guest network exposes the tills and internal computers. An access page that asks for data without explaining why can create a transparency problem. The solution is not to drop the service, but to design it with clear limits from the outset.

2. How the captive portal works

The captive portal is the page the guest sees as soon as they connect to the network, before they can browse. It usually asks them to accept the terms of use, enter a code or leave some contact details. It is the point where the network meets the customer, so it is also where you must provide the correct information. Not all systems offer the same features. Some collect data, others simply display a temporary code. Before choosing, ask the supplier which data is collected, where it is stored, for how long and who can consult it.

3. Prerequisites

Before configuring the service, check a few basic conditions. Without these, the guest network risks being nothing more than an open door with a different name. If a condition is not met, correct it before switching the service on for the public. The check is simple and should be carried out with your IT supplier, who knows the router and firewall installed. Record the answers in a shared sheet.

  • A router or firewall that allows a separate network to be created
  • Router firmware up to date and an administrative password different from the default one
  • An internal network for tills, management system, printers and staff already separated
  • A privacy notice text written or verified by an adviser
  • An internal owner who can explain the service and close access if needed

4. The steps to activate the guest network

The order of steps avoids the most common risk, namely publishing the network before it has been isolated. Each step must be completed and verified before the next. If the supplier suggests skipping one, ask for the reason in writing. At the end of the sequence the network must allow browsing and reading the privacy notice, but not reaching any internal system. Keep a log of the completed steps.

  1. Create a separate guest network, with no access to internal networks, printers or till devices.
  2. Limit bandwidth per device, so that a single user does not occupy the entire line.
  3. Choose what to ask for at connection time, starting from the minimum necessary, usually acceptance of the terms.
  4. Publish a readable privacy notice on the access page, with purposes, retention period and the controller's contact details.
  5. Separate marketing consent from acceptance of the service, making it optional and revocable.
  6. Configure access logging only for the data needed, and for the period indicated by an adviser.
  7. Restrict consultation of the collected data to a specific role, with the ability to delete it.
  8. Publish a notice on acceptable use of the network, without promising a level of security that a public network cannot guarantee.

5. Common mistakes

The first mistake is using the same network for guests and staff, perhaps with the same password written up at reception. The second is collecting email addresses and phone numbers and using them for newsletters without separate consent. The third is keeping logs with no end date, and therefore no rule stating when to delete them. Another mistake concerns the router firmware, left at the last version installed years ago. An outdated network device is a known entry point, and its management must be planned like that of a computer.

6. How to check that it works

The most important test is the isolation test. Connect to the guest network with a personal device and try to reach an internal address, such as the till or a printer. The connection must fail. If it succeeds, the separation must be corrected before reopening the service to customers. Then check the access page, reading the privacy notice as a customer would, and verify that data deletion actually works, by making a test request. Repeat these checks every quarter and after every change of router, firmware or supplier.

7. Obligations and questions to clarify

Obligations depend on the type of business, the service offered and the context in which it is provided. For this reason there is no single answer that applies to everyone. The GDPR applies in every case to the data collected by the access page, and must be respected regardless of other registration rules that may apply to your business. Ask an adviser which registrations are required in your case and how long they must be kept, and have the answer confirmed in writing. Do not rely on generic guidance found online, because the framework can change.

8. How to get started

The first step this week is to ask your IT supplier whether the guest network already exists and is separated from the internal network. If the answer is unclear, carry out a test from a personal phone connected to the guest Wi-Fi, trying to reach a printer or the till. The second step is to have an adviser review the privacy notice and decide which data you really need to ask for. The third is to fix the date of the next quarterly check and assign its responsibility to a specific person.

Frequently Asked Questions

Is customer Wi-Fi a legal requirement?

Not in itself, but many customers expect it. If you offer it, the network must be isolated and the processing of the data of those who connect must be transparent. Check with an adviser which registration obligations apply to your business, as they depend on the type of service and the context in which you offer it.

Can I ask for an email address in exchange for the connection?

You can ask for the data needed to provide the service, but you must explain the purpose for which you collect it. Using it to send offers requires separate, optional and revocable consent. Do not make network access conditional on marketing consent, because the choice must be free. Ask your adviser to verify the wording of the privacy notice.

Do I need to keep access logs?

It depends on the obligations that apply to your business, which should be verified with an adviser. If you keep them, you must state in the privacy notice for how long and why, and limit who can consult them. Keeping logs with no deletion rule is one of the most frequent and most easily avoided mistakes.

Can I use the same network for staff and guests?

This is a choice to avoid. If staff and guests share the network, a guest device can reach internal systems, including the tills. Create two distinct networks with precise rules between them, and keep the internal network for staff with personal authentication.

Who is responsible if a customer uses the network for illegal activity?

Responsibility depends on the case, the contract with the supplier and how you configured the service. For this reason, clear terms of use, a record of the technical facts and a contact for reports are needed. Ask a legal adviser to review the terms before publishing them.

How many people can use the network at the same time?

There is no single valid number for everyone. It depends on the capacity of the line, the router and the number of devices connecting. Limiting bandwidth per device helps prevent a few users from slowing the service for others, and should be verified with the supplier before activation.

About this content

General informational guide. Regulations and technical requirements change over time: always check the official sources and assess your specific case with a qualified technical or legal advisor.

GET IN TOUCH

Talk to our team.

We'll show how Altovar integrates into your infrastructure. No commitment, no sales pitch. Just a technical conversation.

BOOK A DEMO →