GUIDE · RETAIL SECTOR

Connected POS terminals and tills: how to secure them

This guide shows you how to protect the payment points of a shop or restaurant without stopping trading. By the end you will know which checks to make, in what order to apply them and how to tell whether the measures really work. You do not need a complex project: an inventory, a separate network and a few written rules are enough.

Updated october 2026
6 min read
Altovar Technical Editorial Team

1. Why payment points are a target

A connected POS terminal or till is a dedicated computer, linked to the premises' network and often to the management system and the payment provider's service. Those who try to break into a business are often not after the computer itself, but the route it provides to other systems, to customer data or to administrative credentials. The risk therefore also applies to a small premises with a single till.

For this reason, a poorly maintained terminal can become the weakest point of the entire network. The problem is compounded by two common habits. The first is assuming that the provider's terminal is secure by definition, when security also depends on how you manage it. The second is treating the till as an appliance that needs no maintenance. Both beliefs leave gaps that nobody checks.

2. What you need before you start

Before touching any configuration, gather the minimum material. Without these items you do not know what you are protecting, and every intervention risks creating new problems. A formal document is not required, but a tidy and up-to-date sheet is. The minimum material is as follows. Each item should be confirmed with the supplier, because models and versions change often and the available functions depend on the contract.

  • List of all tills, POS terminals, order tablets and connected printers
  • Model, serial number and software version for each device
  • Name of the management system supplier and the payment provider, with support contacts
  • Network diagram showing where the payment devices connect
  • List of existing accounts, with the name of the person each belongs to

3. The steps, in order

The order matters. First you separate the networks and define access, then you update the software and finally you set periodic checks. Anyone who starts with updates without having closed access often discovers that a former employee's account is still active. Each step must leave a written trace: the date, who carried it out and what was changed.

  1. Inventory every till, POS terminal, tablet and printer, with model, location and person responsible.
  2. Separate the network of payment devices from customer Wi-Fi and personal devices.
  3. Check that firmware and software are up to date, or ask the supplier for the policy on models that are no longer supported.
  4. Create a personal account for each user, with permissions limited to their duties.
  5. Disable accounts that are no longer in use, including those of collaborators who have left.
  6. Enable multi-factor authentication for administrative access to the management system and the provider's portal.
  7. Disable ports, services and maintenance functions you do not use.
  8. Limit remote support to the periods of an intervention and close it at the end.
  9. Set up a log of sensitive operations, such as discounts, voids and price changes, and review it at a fixed frequency.
  10. Write a one-page procedure for unusual cases, naming who to call.

4. The most common mistakes

The first mistake is shared access. When everyone uses the same user, the log is worthless, and every change of staff becomes a risk. The second is a password written next to the till or shared in a group chat. The third is remote support left permanently on for convenience, because nobody remembers any longer who enabled it and when. A fourth mistake concerns old devices. A till that the manufacturer no longer updates remains vulnerable even if it is well configured. When the software no longer receives fixes, the right choice is to replace it or isolate it, not to ignore it. Ask the supplier the date until which the model will receive updates.

5. How to check that it works

A measure is not effective until you have tested it. The most useful check is simple: from a device connected to the guest network, try to reach the till or the management system server. The connection must be refused. If it succeeds, the separation has not been done as you thought and must be reviewed with your network provider. Other quick checks concern accounts, by comparing the list with current staff, and updates, by checking the dates of the last maintenance. Carry out these checks at least every quarter and record the outcome. A recorded check proves more than a configuration nobody remembers.

6. What to do next

Once the main points are closed, the work moves to maintenance. Set a person responsible for payment devices, a schedule for updates and a review of accounts. That person does not have to be an expert, but must know whom to turn to and which checks to request. The next step is to link this work to the other areas of the sales point, such as customer Wi-Fi and continuity in case of failure. Tills without a network are a separate issue, which the guide on till continuity covers in more detail.

7. How to get started

The first step this week is to compile the list of devices and accounts, as described in section two. Nothing more is needed to begin. Ask the supplier to confirm that the list is complete and that no device has remote access active without good reason. The second step is to disable accounts no longer in use and change shared administrative credentials. The third is to carry out the network separation test described in section five, recording the result. With these three steps you have already reduced the risk in a concrete way.

Frequently Asked Questions

Do I have to replace the till to make it secure?

Not necessarily. Many measures, such as personal accounts, network separation, disabling remote support and an operations log, do not require new equipment. Replacement becomes necessary when the model no longer receives security updates from the manufacturer. Ask the supplier for the end-of-support date and plan the change in advance.

Can I use the owner's personal tablet for the management system?

This is a practice to avoid. A personal device mixes private and professional use, often without regular updates and with uncontrolled applications. If you need to access remotely, use a dedicated company device, with a personal account and multi-factor authentication, and agree the rules with the management system supplier.

Who updates the payment terminals?

It depends on the contract and the model. In many cases the provider manages terminal updates, while the management system and the till computer remain your responsibility or that of your IT supplier. Ask in writing who does what and how often, and keep a copy of the answer with the device list.

What should I do if I suspect tampering?

Do not use the device until you receive instructions. Alert the payment provider immediately, note the date, time and what you noticed, and keep the device exactly as it is. Do not attempt improvised repairs, as you could erase useful traces. Follow the written procedure and, if necessary, involve a security adviser.

Is the management system supplier responsible for the till's security?

Only for the part they look after. The supplier may protect the platform and the connection to it, but accounts, permissions, the premises' network, the physical devices and staff training largely remain your responsibility. Define the division of responsibilities in writing before signing or renewing the contract.

About this content

General informational guide. Regulations and technical requirements change over time: always check the official sources and assess your specific case with a qualified technical or legal advisor.

GET IN TOUCH

Talk to our team.

We'll show how Altovar integrates into your infrastructure. No commitment, no sales pitch. Just a technical conversation.

BOOK A DEMO →