GUIDE · LOGISTICS SECTOR

IT and cyber security in logistics: a guide for warehouses, carriers and terminals

This guide helps you understand which IT systems support a logistics operation, where the risks concentrate and in what order it makes sense to act. By the end you will know where to start, which in-depth guides to read and which questions to put to your IT supplier.

Updated october 2026
9 min read
Altovar Technical Editorial Team

1. Why logistics is an attractive target

In logistics a disruption to IT shows up immediately. If the warehouse management system stops, goods do not leave, loads sit idle on the dock and customers call to ask where their orders are. The damage is not only technical: it is economic and reputational, and it grows with every hour of downtime. That is why attackers often target the systems that keep operations moving, since blocking a service can be worth more to them than stealing data.

The sector also has a characteristic that makes it more exposed. The chain involves many different parties: the warehouse uses its own management software, the carrier its own tracking system, the customer and the terminal their own platforms. Every connection between these worlds is a possible point of entry. Security therefore does not stop at the boundaries of your company; it also concerns how you connect to others and who has access to your data.

2. The systems that support a logistics operation

A logistics operation depends on a handful of core systems. The WMS (Warehouse Management System, the software that manages stock, locations and picking in the warehouse) is the heart of the warehouse. The TMS (Transport Management System, the software for planning and tracking transport) governs vehicles and carriers. To these are added the administrative management software, handheld terminals, label printers, vehicle telematics and data exchanges with customers and partners, often via EDI (structured exchange of documents between systems).

Not all these systems carry the same risk, and the most useful way to approach them is to ask what happens if each one stops or is tampered with. The table summarises the role of each system and the question to put to the supplier. Actual characteristics depend on the product and how it is installed, so the table is a starting point for the conversation, not a final judgement. Bring the table to the first meeting with the supplier and note the answers.

SystemRole in the operationQuestion to ask the supplier
WMSManages stock, picking and locationsWho can change stock levels, and how are changes tracked?
TMSPlans transport and tracks carriersWhat access do carriers have, and how is it revoked?
Handheld terminalsConfirm operations in the warehouseAre they managed centrally, and can they be locked remotely?
EDI or file exchangesTransmit orders and documentsHow is it verified that a message is authentic and complete?
Vehicle telematicsDetect vehicle position and statusWho sees the position data, and for how long is it kept available?

3. The most frequent risks in practice

The best-known risk is ransomware, a programme that encrypts data and demands a ransom to restore it. In a warehouse this means the WMS stops responding and picking grinds to a halt. Another common scenario is supplier access: a support account left active, a remote connection always open or a password shared among several people. Whoever gains that access can read, change or block data without being noticed.

There are also less technical risks. Order fraud, with false pick-up requests or changes to the delivery destination, exploits trust between partners and the haste of staff. Connected devices, such as readers, sensors and weighing equipment, can also go without updates for long periods. A sophisticated attack is not needed to cause damage: a process that nobody really checks is enough.

4. Obligations and references: what to check

The regulatory picture depends on size, activity and the company's role. The NIS2 Directive, transposed in Italy by D.Lgs. 138/2024, lists the transport sector among those of relevance, but not all logistics companies fall within it in the same way. If you do, the obligations include documented management of IT risks and reporting of significant incidents, with an initial notification within 24 hours. Check your position with an adviser before deciding.

The GDPR applies whenever you process personal data: recipients' contact details, customer data, data on drivers. In the event of a personal data breach, notification to the authority must be made within 72 hours of discovery, where required. Keep two questions separate: where the data is stored and who can lawfully access it. They are different questions, and one does not automatically answer the other.

5. Network, terminals and segmentation

Many problems stem from the network rather than from a single piece of software. A warehouse with metal racking, moving vehicles and many handheld terminals requires wireless coverage designed for that environment, not copied from an office. Divide the network into separate segments for administration, warehouse, terminals, equipment and guests, so that they cannot see each other freely. A compromised device must not become access to everything.

Handheld terminals deserve centralised management. You need to know which devices exist, who uses them, which software version they run and how they are blocked if lost. A lost terminal with active access to the management software is a concrete and frequent risk. The dedicated guide on warehouse networks covers the operational steps for coverage and for choosing devices.

6. Continuity: how to work when systems stop

A logistics continuity plan must set out how to carry on without the system. You need a written degraded mode: which operations continue on paper or on worksheets, who decides when to switch, how movements are recorded during the emergency and how they are brought into the system once it is back. Without these rules, every outage becomes an improvised discussion while vehicles wait.

Backups must be separate from the production system and, where possible, immutable, meaning they cannot be modified for a defined period. The 3-2-1 rule remains a useful reference: three copies, on two different media, one of them off-site. An untested copy, however, is not a guarantee. Carry out periodic restore tests and measure how long it takes to return to normal.

7. In-depth guides and the recommended order

This guide is the sector overview. More specific questions have dedicated guides. If you run a warehouse, start with the wireless network and operational continuity, as these are the areas that most often halt work. If you exchange orders with customers and carriers, read the guide on EDI data exchange and the one on integrating WMS, TMS and management software. If you operate in a port or terminal, the guide on port systems is the starting point.

Other questions need a specific reading: vehicle geolocation and driver privacy, fraud involving false pick-up orders, the comparison between private 5G and Wi-Fi for yards, and the regulation on electronic freight transport information. There is no need to read them all at once. Choose the one that answers your most urgent problem and return to the others when the systems map is complete.

8. How to start

The useful first step this week is a simple map, which does not require costly tools. List the systems you use in the warehouse and in transport, each one's supplier, who has access and what would stop if a system did not respond for a full day. A perfect document is not necessary. You need a written baseline to start from, to share with whoever leads operations and to update each time a supplier, connection or person with access changes.

Then ask your IT supplier to verify three things together: which third-party accesses are active, which backups have been restored recently and which devices are not receiving updates. With these answers you can set priorities and bring in an adviser for the regulatory side. Start with whatever would do the most damage if it stopped tomorrow. If the supplier cannot answer one of these questions, make a note: that gap is already a useful result of the map and should be treated as a priority.

Frequently Asked Questions

Does a small logistics company need to worry about IT security?

Yes, because the work depends on the same systems regardless of size. What changes is the depth of the measures, not the need for them. A small company can start with personal accounts with strong passwords, separate backups and a list of the suppliers who access its systems. Your IT supplier or an adviser can define a level proportionate to your activity and tell you when it is worth moving up a level.

Does the NIS2 Directive apply to all logistics companies?

No, not automatically. The directive covers sectors and companies according to size and activity, and transport is among the sectors considered. The Italian transposition is in D.Lgs. 138/2024. Check your position with an adviser before deciding. If you fall within scope, the obligations include documented risk management and reporting of significant incidents.

What is the difference between WMS and TMS from a security standpoint?

The WMS manages the warehouse: stock, picking and locations. Uncontrolled access can alter quantities or block dock operations. The TMS manages transport: planning, carriers and transport documents. Uncontrolled access can divert or delay shipments. In both cases the key question is who can change the data and how those changes are tracked.

Can an external supplier have remote access to the management software?

Yes, but only with limited access, authorised for a specific intervention and revoked at the end. Ask that every access is logged and that the support account does not stay active. Remote access that is always open is one of the most frequent causes of problems. Keep an up-to-date list of who can get in, with the internal owner of each access.

How long do I have to notify a personal data breach?

The GDPR requires notification to the supervisory authority within 72 hours of becoming aware of the breach, where notification is required. Not every breach must be notified, and the assessment rests with the data controller, with the help of an adviser. For this reason it is worth having a written procedure that says who assesses, who decides and who writes.

Where do I start if I have little time?

Map your systems, the suppliers with access and your backups, and check the last restore test. These are activities that can be completed in a week with your IT supplier. The result tells you which other guides to read and which question to ask first. You do not need a full project to begin reducing risk in a concrete way.

Is security at ports and terminals my responsibility?

It depends on your role. If you operate a terminal or a shared platform, you bear direct responsibility for the systems you control. If you are a carrier or freight forwarder using those systems, you are responsible for the credentials and the data you enter. In every case a written agreement with partners is needed on who does what in the event of an incident.

About this content

General informational guide. Regulations and technical requirements change over time: always check the official sources and assess your specific case with a qualified technical or legal advisor.

GET IN TOUCH

Talk to our team.

We'll show how Altovar integrates into your infrastructure. No commitment, no sales pitch. Just a technical conversation.

BOOK A DEMO →