GUIDE · LOGISTICS SECTOR

Fake pickup orders and shipment hijacking: how to prevent them

This guide shows you how a shipment fraud works, why logistics is exposed and which controls make a hijacking harder. By the end you will know who can change an order, how to verify an unusual request and what to do if an attempt has already succeeded.

Updated october 2026
8 min read
Altovar Technical Editorial Team

1. How the fraud works

A fake pickup order is a request, usually sent by email or phone, that appears to come from a customer or an authorised carrier. The sender asks for goods to be collected from a warehouse or for the destination of a delivery in progress to be changed. If staff do not verify the request, the load leaves for an address controlled by the fraudster, and the goods disappear before anyone notices.

There are frequent variants. The fraudster may imitate the signature and tone of a regular customer, may pose as a driver arriving with forged documents, or may tamper with a genuine message by changing only the address or bank details. In every case the weak point is trust placed in a message without independent checking, that is, without verifying the request through a channel other than the one it arrived on.

2. Why logistics is exposed

Logistics combines two factors that favour fraud. The first is volume: many orders, many vehicles, many people involved and little time for each check. The second is the chain of partners, which makes it hard to know who is genuinely authorised to request a pickup. Every handover is an opportunity to slip in a false request. In practice, a request can pass through several hands before it reaches the loading bay, and each person may assume someone else has done the check.

Time pressure adds to this. Staff on the loading bay have every reason not to hold up a load, and an urgent message can feel like a favour to accommodate. The most effective frauds exploit exactly this haste rather than technical skill. For this reason the procedure must state that urgency is never a reason to skip a check.

3. Prerequisites: who can change what

Before building any check, you need to know who is authorised to do what. Without a clear list, every verification turns into a debate about who the right person is, and the time lost in that debate is exactly the time the fraudster wants. Define these elements and keep them up to date, because they change often with contacts and staff. You do not need a complex system to start.

Prepare at least these items, and keep them somewhere floor staff can consult without access to the management system. A list that exists only inside a system may be unavailable precisely when it is needed. Check the list whenever a contact changes and at least once a year, because people leave the relationship without anyone updating the references.

  • List of customers and carriers authorised to request pickups or changes, with their contacts.
  • Official channels for change requests, excluding any that cannot be verified.
  • Reference addresses and contact details for each customer, recorded in the management system.
  • Internal staff authorised to approve a change, with a deputy if needed.
  • Written procedure for urgent requests, which cannot be skipped.

4. Steps to prevention

Prevention works as a sequence of checks. None of these is sufficient on its own, but together they make it much harder to dispatch a load on the basis of a false instruction. Each step needs an owner, otherwise it remains an intention, and each owner must know what to do when a check does not add up. Staff must be able to stop a pickup without having to justify the decision to someone in a hurry.

The recommended sequence is as follows. Follow it in order, because the identity check is pointless if the address has not already been compared with the registered one, and dual approval only makes sense once the request has been recorded. Adapt the steps to your management system and to your customers' habits, but do not drop any of them without a written decision. Keep it posted near the workstation.

  1. Every pickup or change request must be recorded in the system before it is carried out.
  2. Verify the requester's identity through a channel other than the one the request arrived on.
  3. Compare the address or contact details with those already on record, without accepting new details simply because you received them.
  4. For changes of address or payment details, require dual approval from inside the company.
  5. Check the pickup documents and the identity of the person presenting them against the authorised list.
  6. Keep a record of every check, with date, person and outcome.

5. Common mistakes and how to test your controls

The first mistake is verifying a request by replying to the same email it came from. If the address is false, the confirmation ends up in the fraudster's hands. Verification must go through a known contact already on record, not through a number or address supplied in the request itself. The second mistake is treating urgency as a reason to skip the procedure, because a message asking you to act quickly is one of the most common signs of fraud.

An untested control is only a written rule. Periodically simulate a fake request, agreed in advance, and observe whether the procedure is followed. The test should not serve to punish anyone, but to understand where the procedure is weak and where more training is needed. The third mistake is failing to train staff: those on the loading bay must know that an unusual request should be reported, without fear of being seen as too cautious.

6. What to do after an attempt or an incident

If an attempt is blocked, record it nonetheless. An attempt is valuable information: it shows which channels are exposed and which request patterns are circulating. Warn the customers and carriers involved so that they can check too. If a load has already been delivered to the wrong recipient, report the situation immediately to the competent authorities and to your insurer. A false alarm must be recorded with the same care.

If the incident involves personal data, for example recipients' names and contact details, the notification to the supervisory authority required under the GDPR must be assessed within 72 hours of becoming aware of the breach. Involve your privacy adviser and your lawyer straight away, without waiting to have all the answers. Keep every document and every message received, as they will be needed to reconstruct the facts.

7. How to get started

The first step this week is to ask the person responsible for pickups who can currently request a change, through which channels and with what verification. Write down the answers and compare them with the real contact list. The differences are where to start, and they often emerge exactly where nobody thought there was a problem. Also ask whether anyone has received unusual requests in recent months, and note down those that were refused too.

Then set a one-page written procedure for change requests, including dual approval for new addresses. A simple procedure that is applied is worth more than a complete manual nobody consults on the loading bay. Present it to staff in a short meeting and have those who apply it every day sign to confirm they have read it. Review it after the first month, with the people who have used it.

Frequently Asked Questions

How do I recognise a fake pickup order?

Be wary of urgent requests, of address or bank detail changes arriving at the last minute, of messages that avoid telephone verification, and of people who turn up with documents that do not match the authorised list. No single signal is proof on its own, but a combination of several unusual elements is reason enough to stop and verify.

Is a check by email enough to confirm a request?

No. If the request arrived by email, verification must go through a different channel, such as a telephone number already recorded in the management system. Do not use contact details supplied in the request itself, as they may be false. This rule applies to regular customers too, whose mailbox may have been compromised.

Can a carrier change a delivery destination on its own?

It depends on the contract and on the instructions received from the sender. As a rule, a change of destination must be approved by whoever issued the order, not by the carrier alone. Define in writing who can authorise a change and by what procedure, and inform the carrier of these rules at the start of the relationship.

What should I do if the load has already been delivered to the wrong recipient?

Report the situation immediately to the customer, the carrier and your insurer, and agree with your lawyer how to proceed with the competent authorities. Keep every document and every message received. If personal data is involved, the GDPR requires you to assess notification within 72 hours of becoming aware of the breach.

Is staff training really necessary?

Yes, because most frauds exploit haste and trust, not technical skill. Short, repeated training with real examples of unusual requests is more useful than a one-off course. It teaches people on the loading bay that raising a doubt is correct and expected behaviour.

About this content

General informational guide. Regulations and technical requirements change over time: always check the official sources and assess your specific case with a qualified technical or legal advisor.

GET IN TOUCH

Talk to our team.

We'll show how Altovar integrates into your infrastructure. No commitment, no sales pitch. Just a technical conversation.

BOOK A DEMO →