GUIDE EUROPE · DIGITAL SOVEREIGNTY

Modern business VPNs in Europe: a WireGuard and IPsec benchmark

A VPN creates an encrypted channel between devices and the company network, or between two sites, and a poor choice can become an open door. This guide compares WireGuard and IPsec on the criteria that matter: ease of management, compatibility with existing equipment, how user identity is handled and real performance on European links. It covers what to measure, which mistakes to avoid and how to run a pilot.

Updated october 2026
7 min read
Altovar Technical Editorial Team

1. Why the choice of VPN matters for the business

A VPN, or virtual private network, creates an encrypted channel between a device and the company network, or between two sites. It is used for remote working, to connect branch offices and to give suppliers secure access. If it is poorly designed, it becomes an open door. If it is too slow or unstable, staff look for shortcuts that bypass the rules, and the risk increases.

Choosing between WireGuard and IPsec is not only a matter of speed. What counts is ease of management, compatibility with equipment already in place, how users are managed and whether the configuration can be updated without interrupting work. A serious comparison covers all of these and does not stop at the advertised throughput. Also ask how easy it is to add or remove a user or device.

2. WireGuard in practice

WireGuard is a modern VPN protocol, with source code that is very compact compared with other solutions. Each device has a key pair and trusts only the peers whose public key it knows. Configuration is typically simple: keys are exchanged, the permitted addresses are specified and the tunnel is ready. It uses modern cryptography, including ChaCha20 with Poly1305 authentication, a common choice when the processor has no hardware acceleration for AES.

The most important limitation is that WireGuard does not manage user identity on its own. The protocol has no accounts with passwords or authentication factors: access is tied to the device's key. A company therefore needs an additional layer that links keys to people, revokes access and logs connections. Without that layer, the simplicity turns into manual management that is hard to keep under control over time.

3. IPsec in practice

IPsec is a family of standards for securing IP networks, and for years it has been the basis of site-to-site VPNs between firewalls and routers from different vendors. Keys are negotiated through the IKE protocol, in version 2, which is the most widely used today. The advantage is compatibility: almost all business security appliances support IPsec, and the protocol's maturity is a source of confidence for many teams.

The drawback is complexity. Negotiation, encryption and authentication settings must match on both sides, and a configuration error can prevent the connection without clear messages. For remote access by individual users there are variants that authenticate with certificates or accounts, but these require a more elaborate management infrastructure. Maintenance needs careful planning.

4. Practical comparison of WireGuard and IPsec

The table compares the two protocols on practical criteria. It does not name an absolute winner: the choice depends on the type of connection, the existing equipment and the skills of the team. The assessments are qualitative, because real performance depends on hardware and configuration. The values in the table are therefore meant to guide the choice, not to settle it. The final judgement should be made after a test on your own hardware.

A common case is using IPsec between sites, where security appliances support it natively, and evaluating WireGuard for staff working remotely, where simpler configuration helps. This combination is only an example and should not be adopted without testing. What matters is that the chosen solution is managed, documented and monitored. A forgotten VPN with no owner is more dangerous than one that was never activated.

CriterionWireGuardIPsec (IKEv2)
Ease of configurationHigh, with few settingsMedium or low, with many parameters to agree
Compatibility with equipmentGrowing, but not native everywhereVery wide, especially among security appliances
Management of user identityBased on device keys, requires an external layerSupports certificates and accounts, with dedicated infrastructure
PerformanceGood, depends on hardware and configurationGood, depends on hardware and configuration
Maturity and team supportRecent protocol, with less widespread experienceEstablished protocol, with many skills available on the market

5. Performance: what to measure in practice

Speed figures published by vendors and laboratory tests rarely match real-world conditions. Performance depends on processor power, hardware support for encryption, packet size, the network path and device load at peak times. A test run against a quiet server on a clear line does not show how the connection holds up for a busy office.

It is worth measuring throughput, meaning the amount of data transferred over time, together with latency and CPU usage. The MTU setting, the maximum packet size, should also be checked: an incorrect value can cause fragmentation and slowdowns that are hard to diagnose. Repeat the tests from the real locations where users work, not only from the test server. Repeat the measurement after a few weeks of real use to see whether the picture changes.

  • Measure throughput with a test repeated across several time slots.
  • Record latency and its variability, not just the average.
  • Check the CPU usage of the VPN device during transfers.
  • Verify the MTU on the actual path to avoid packet fragmentation.
  • Test real applications such as video calls and line-of-business systems, not just a speed test.
  • Compare results against the concrete requirements of your processes, not against an absolute number.

6. Common configuration mistakes

The first mistake is sharing the same key or password among several users. This means you no longer know who connected, and you cannot revoke one access without changing everything. The second is leaving ports and rules open more widely than necessary, assuming the VPN alone is enough. The third is routing all traffic through the tunnel without knowing which applications depend on it, causing slowdowns that nobody can explain.

The fourth mistake is not planning key rotation and the revocation of lost or retired devices. A forgotten device with active access is one of the most underestimated risks. Finally, remember that multi-factor authentication must be enabled at the access point or identity layer, not only on the laptop. Verify the configuration with a real access attempt from an unauthorised device.

7. Getting started: the first concrete step

The first step is to inventory your current connections: which VPNs exist, between which sites or devices, using which protocol, who uses them and which applications pass through them. You will often find links that have been active for years and that nobody manages any more. This list is the basis for any comparison. Also note who created each connection and who maintains it today. If the owner cannot be found, that is already a problem to solve.

Then choose a pilot case, for example remote working for a small group of staff, and compare the two solutions against the same criteria as the table. Measure performance from real locations, check access management and test revoking a device. Only after the pilot does it make sense to extend the choice to the whole organisation. Ask the provider to document the pilot with written data.

Frequently Asked Questions

Is WireGuard more secure than IPsec?

Both use modern cryptography when configured correctly. The difference lies in complexity and management. WireGuard has few settings, which reduces the risk of configuration errors, but it does not manage user identity on its own. IPsec is more complex, but it is very widespread and supported by appliances. Security depends above all on how the solution is managed.

Can I use WireGuard with the firewall I already have?

It depends on the model and firmware. Some appliances support it natively, others require additional software or do not support it at all. Check the manufacturer's documentation for the exact version, and ask your provider whether the solution is managed and kept up to date. Do not assume compatibility without testing it.

Do I need multi-factor authentication with the VPN as well?

Yes. For staff accessing from outside, it is a strongly recommended measure. With WireGuard, which does not manage users, MFA must be implemented in the identity layer that authorises access. With IPsec it depends on the authentication method chosen. Make sure that remote access does not rely on a single password.

Is the provider's speed test reliable?

As a general indication it can be useful, but it rarely reflects real conditions. Laboratory tests use ideal hardware and network. To decide, you need measurements taken on your own hardware, from your offices and during working hours, with the applications you actually use.

What happens if a member of staff loses their laptop?

The device must be revoked quickly. With WireGuard this means removing its public key from the server; with IPsec it means revoking the certificate or account. In both cases you need a written procedure, carried out by a named person. It is worth testing it periodically.

About this content

General informational guide. Regulations and technical requirements change over time: always check the official sources and assess your specific case with a qualified technical or legal advisor.

GET IN TOUCH

Talk to our team.

We'll show how Altovar integrates into your infrastructure. No commitment, no sales pitch. Just a technical conversation.

BOOK A DEMO →