1. Why manufacturers ask whether they are included
Many manufacturing companies hear about NIS2 and assume it only applies to large industrial groups or strategic sectors. The reality is more nuanced. Directive (EU) 2022/2555 lists some manufacturing activities in Annex II, among other critical sectors, and it does so by type of product, not by the fact of being a factory. Two metalworking companies can therefore find themselves in opposite situations, depending on what they make and for which markets.
The first mistake is to decide on the basis of a general impression. The second is to rule yourself out because you are not a provider of essential services: manufacturing can fall in scope purely through the production of certain goods, and it can be involved indirectly if it supplies customers who are within scope. For this reason the assessment must be based on the product, the size and the supply chain, and it must be put in writing so it can be revisited when something changes.
2. The Annex II sectors that matter
Annex II lists several manufacturing categories: medical devices and in vitro diagnostic devices, computers and electronic and optical products, electrical equipment, machinery, motor vehicles and trailers, and other means of transport. These categories have precise technical definitions, which you should read in the applicable text before concluding that an activity is included or excluded. A generic heading is not enough: the exact description of the product is what counts.
If your company makes components for these sectors, the question does not resolve itself. Ask whether the component is a finished good, whether it is incorporated into a product on the list and who the end customer is. Write the answers down with the date on which you verified them: you will need them for the internal plan and for conversations with customers, who will ask for exactly this kind of detail.
- Medical devices and in vitro diagnostic devices
- Computers, electronic and optical products
- Electrical equipment
- Machinery and equipment not classified elsewhere
- Motor vehicles, trailers and semi-trailers
- Other means of transport
3. When manufacturing is really in scope
Beyond the sector, size matters. The directive's thresholds look at headcount and at turnover or balance sheet total, using the European definitions for medium and large enterprises. Size should therefore be checked against the latest approved financial year, but on its own it does not rule a company in or out: a small company can fall into specific categories, and a large company can remain outside the sector.
A common case is the group with several sites. Affiliated companies, plants in other countries and work carried out for third parties can change both the headcount and the classification. Do not do the calculation from memory: document which data you used, which companies you included and why, and check with your adviser whether they should be considered together. A documented assessment is worth more than a verbal estimate.
4. Plants, factory networks and OT systems
The most sensitive point for manufacturers is the separation between office IT systems and production systems, often called OT (operational technology, meaning the technologies that control machines and processes). Production lines, PLCs (programmable logic controllers) and supervisory systems collect data and receive commands from the network. If they are connected, an IT incident can stop production even when the office servers are not involved.
The directive requires you to manage the risk of all the organisation's systems, not only administrative ones. Check which machines have network access, which remote accesses exist for maintenance suppliers and whether the networks are separated. This work is often the longest, because it requires the people who know the factory and the people who know the network to talk to each other: it is best to start straight away, without waiting for a deadline.
5. What the directive asks for in practice
NIS2 does not impose a particular product or type of machine. It requires a set of risk management measures which, for a manufacturing company, translate mainly into the points listed below. Each measure must be documented, approved by the management body and checked over time, not simply declared on the website or in sales proposals. A periodic check, even a simple one, shows that the measure is alive.
- Risk analysis and security policies approved by the management body
- Incident handling, with clear procedures to detect and contain incidents
- Business continuity, with verified backups and production recovery plans
- Supply chain security, including software and remote maintenance
- Vulnerability handling, with updates and testing phases
- Access control and multi-factor authentication where possible
- Staff training and awareness
6. Common mistakes
The first mistake is to treat anything that is not the IT office as out of scope. Those who run production often do not have a complete inventory of connected machines, and whoever installed them may be an external supplier with a remote access that nobody has recorded. The second is to think a firewall is enough: it is useful, but without segmentation, control of remote access and verified backups, an attack can reach the production line.
The third mistake is to postpone the matter until a customer asks. By then the time available for a credible answer is already short, and an improvised response carries more weight than an assessment made calmly. The fourth is to rely solely on the IT manager, without involving production, maintenance and purchasing, which are the functions that really know the plants and suppliers. For reporting, remember the general deadlines: an early warning within 24 hours of becoming aware of a significant incident, followed by a notification within 72 hours.
7. How to get started
This week, make two lists. The first covers plants, production lines and machines connected to the network, with the date of the last known update. The second lists suppliers that have remote access or manage the production software. With these two lists you can ask your adviser or security provider for a targeted assessment, rather than starting from scratch, and save time on the longest part of the work.
Frequently Asked Questions
Does a job shop doing contract machining fall within NIS2?
It depends on the product you work on and on your size. Generic machining does not automatically equal one of the Annex II sectors. If you produce components for machinery, vehicles or devices, check whether your end customer is within scope and whether your activity fits the listed categories. Document the assessment and have an adviser verify it, especially if your size is close to the thresholds.
Are production machines included in the scope?
The point is not to include the machines as such, but to manage the risk of the systems that control them and connect them to the network. If a company falls within scope, the security of these systems is part of the required measures. For this reason you need an inventory of OT systems, of their connections and of supplier access.
If I produce for a customer that falls under NIS2, what changes?
Your customer will have to manage the risks in its supply chain and will probably ask you for assurances on security, access and incident notification. This is not a direct obligation on you simply because you are a supplier, but it is a concrete reason to prepare your answers. Ask the customer in writing which requirements it wants, and assess whether they are realistic.
What are the deadlines for reporting an incident?
The directive provides for an early warning within 24 hours of becoming aware of a significant incident, followed by a more detailed notification within 72 hours. These are tight deadlines for a production site that has stopped, so have a contact person, a communication template and a list of critical systems ready before an incident happens.
Do I need an adviser to understand whether I am in scope?
It is not mandatory, but it is advisable for borderline cases. A legal adviser helps you read the applicable text, and a security adviser helps you map plants and networks. Bring the two lists of systems and suppliers prepared: they reduce the time and cost of the assessment.